General inspection standard for sheet metal chassis
-
- 444
- The sheet metal chassis is not allowed to be tilted or partially skewed with the naked eye. The perpendicularity between frame column and base shall be less than 1.5mm. During the inspection, the upper surface of the base shall be taken as the benchmark, and the inner edge surface of the upper end of the column shall be taken as the measuring point.
- The parallelism between the top frame and the base of the sheet metal chassis is less than 1mm. The inspection points are the upper surface of the base and the lower surface of the top frame, and they are benchmarks for each other. It can also be detected by measuring the length of the diagonal of the six sides, and the difference shall not exceed 2.5mm. If there is a middle partition, the parallelism between the top frame and the base can be widened to 1.5mm, and the parallelism between the middle partition and the top frame or base is less than 1mm.
- The absolute value of the diagonal difference between the upper and lower frames of the sheet metal chassis is less than 1.5mm.
- The column of the sheet metal chassis shall not be twisted, and the parallelism between the connecting lines at both ends of each column and the upper and lower enclosure and the adjacent plane of the enclosure shall be less than 0.5mm.
- For the slideway supporting the plug-in box, the parallelism of the working surface composed of the left and right slideways on the same layer with respect to the upper surface of the base shall be 1mm, and the sheet metal chassis shall ensure that the absolute value of the gap between the two adjacent panels after the plug-in box is installed shall not exceed 0.6mm.
Quick Links: Sheet Metal Parts Components | Aluminium Bow Mount Bracket | Sheet Metal Frame | 4×4 Corner Brackets | Sheet Metal Chassis | Decorative Corner Brackets | U Shape Bracket | Powder Coating Small Parts | China Sheet Metal Manufacturer | Sheet Metal Cover | Metal Frame Brackets | Sheet Metal Mounting Brackets | Sheet Metal Brackets | Kiosk Enclosure Manufacturer | Metal U Bracket | Sheet Metal Enclosures | Custom Sheet Metal Parts | Metal Enclosure Manufacturers | Sheet Metal Cabinet | China Sheet Metal Parts | Power Cabinet | Cabinet Power | Distribution Cabinet | Cabinet Distribution | Power Supply Cabinet | Cabinet Power Supply | Sheet Metal Bracket | Sheet Metal Parts Manufacturer | Sheet Metal Mounting Bracket | Custom Electrical Enclosures | Outdoor EV Charger Enclosure | Custom Sheet Metal Boxes | Custom Steel Parts | Sheet Metal Components | Sheet Metal Prototype | Prototype Sheet Metal Parts | Precision Laser Cutting | Custom Sheet Metal Enclosures | Sheet Metal Box | Precision Sheet Metal Frames | Metal Enclosure Manufacturer | Prototype Sheet Metal | Custom Made Metal Parts | U Shaped Bracket | Sheet Metal Box Fabrication | Sheet Metal Bracket | China Metal Manufacturing | Stainless Brackets Marine | Custom Aluminum Parts | China Custom Aluminum Parts | Aluminum Parts Manufacturing | Metal Manufacturing in China | Custom Electrical Enclosures | Custom Electrical Enclosures Manufacturer | Custom Aluminum Enclosure
The sheet metal chassis is not allowed to be tilted or partially skewed with the naked eye. The perpendicularity between frame column and base shall be less than 1.5mm. During the inspection, the upper surface of the base shall be taken as the benchmark, and the inner edge surface of the upper end of the…
The sheet metal chassis is not allowed to be tilted or partially skewed with the naked eye. The perpendicularity between frame column and base shall be less than 1.5mm. During the inspection, the upper surface of the base shall be taken as the benchmark, and the inner edge surface of the upper end of the…